RS PRO Silver Acrylic Resin Conductive Lacquer for PCB, Electronic

RS PRO Electrically Conductive Paint

This silver conductive paint is primarily used to repair PCB tracks or manually draw a simple circuit. The paint can be used in various ways including to paint-on an electrical screen, or to make electrical connections on non-solderable surfaces.

Product Features

• ● Touch-dry in around 10 min and usable within your circuit in 30 minutes.
• ● For full mechanical and electrical properties you should bake it once it is dry at between 121°C to 148°C for 5 mins to 10 mins.

Product Warnings

• This paint is flammable.

How to repair a damaged PCB trace

• ● Identify the damaged area.
• ● Remove the damaged solder and PCB trace using a scalpel or sharp knife.
• ● Clean the affected area with a lint-free cloth and isopropyl alcohol.
• ● Shake bottle vigorously before beginning and replace bottle cap when not in use.
• ● Paint the new trace (for very fine trace lines, use electrical tape to mask off the area and remove once painted for a clean straight line).
• ● Leave for 30 minutes then bake for 5 to 10 minutes for maximum mechanical and electrical properties.

Notes

Shake vigorously before using and replace cap when not in use.

Warning

Flammable