Technical Documents
Specifications
Brand
Electro PjpProduct Type
Phase Rotation Tester
Connection Type
Test Lead
Overvoltage Category
230 V CAT IV
Weight
390g
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
50°C
Length
1.5m
Standards/Approvals
européenne « Basse Tension » 2014/35/UE, européenne « RoHS », EN / CEI 60529, EN / CEI 61010031:2015, européenne 2015/863/UE, Règlement européen « REACH » n°1907 / 2006
Minimum Voltage
230V
Maximum Voltage
400V
Country of Origin
France
Product Details
The Electro PJP CPI controller having a set of one IMD test box and two IP2X fused probes leads. It is used for checking the permanent insulation monitors (CPI) of IT earthing systems. The CPI-Test385A offers electrical resistances of 385 ohms, 770 ohms, 3.5k ohms, and 85.5k ohms between its black 4 mm banana terminal and its other 4 mm banana terminals. The "low" resistors are used to simulate a fault and thus cause the CPI to react.
Stock information temporarily unavailable.
₹ 55,090.96
₹ 55,090.96 Each (Exc. GST)
₹ 65,007.33
₹ 65,007.33 Each (inc. GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 55,090.96
₹ 55,090.96 Each (Exc. GST)
₹ 65,007.33
₹ 65,007.33 Each (inc. GST)
Stock information temporarily unavailable.
1
Technical Documents
Specifications
Brand
Electro PjpProduct Type
Phase Rotation Tester
Connection Type
Test Lead
Overvoltage Category
230 V CAT IV
Weight
390g
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
50°C
Length
1.5m
Standards/Approvals
européenne « Basse Tension » 2014/35/UE, européenne « RoHS », EN / CEI 60529, EN / CEI 61010031:2015, européenne 2015/863/UE, Règlement européen « REACH » n°1907 / 2006
Minimum Voltage
230V
Maximum Voltage
400V
Country of Origin
France
Product Details
The Electro PJP CPI controller having a set of one IMD test box and two IP2X fused probes leads. It is used for checking the permanent insulation monitors (CPI) of IT earthing systems. The CPI-Test385A offers electrical resistances of 385 ohms, 770 ohms, 3.5k ohms, and 85.5k ohms between its black 4 mm banana terminal and its other 4 mm banana terminals. The "low" resistors are used to simulate a fault and thus cause the CPI to react.
