Alpha Wire Hookup Wire TEFLON Series Green Hook Up Wire, 28 AWG, 7/0.13 mm, 0.13 mm core strands, 305 m,

Belden Hookup Wire TEFLON Series Hook Up Wire, 305m Cable Length, 0.08mm² Cross Sectional Area - 5852 GR001

This hook-up wire is a Teflon-insulated single-core conductor designed for electrical interconnection in demanding industrial environments. It delivers reliable signal and power transmission where elevated temperature endurance and chemical-resistant insulation are required.

Features & Benefits

• Silver-plated copper conductor minimises contact resistance and corrosion
  7-strand construction improves flexibility for tight routing
  0.08mm² cross section supports Compact circuitry connections
  Rated to 600V for use in medium-voltage wiring tasks
  Flame-retardant PTFE jacket enhances safety in installed systems
  Operational from -60°C to 200°C for high-temperature applications

**Applications**

• Suitable for harnesses in industrial automation cabinets
  Ideal for wiring in temperature-variable test rigs
  Used for internal connections on control panels and drives
  Can be used for signal wiring in instrumentation assemblies

How is the conductor configured to aid installation in confined spaces?

The conductor consists of seven fine strands which increase pliability, making the cable easier to bend and route within tight looms.

What environmental regulations relate to the material composition?

Materials comply with REACH and EU RoHS directives and meet the referenced restrictions on certain hazardous substances.

What mechanical handling limits should be observed during assembly?

Maximum pull tension is 1.37 lb and a minimum bend radius of ten times the cable diameter should be maintained to avoid damage.

How is the product supplied for production use?

Available on spools with common put-ups including 100m and continuous 305m lengths, with particular colour and length combinations sometimes available by special order.

What electrical characteristic is relevant for design calculations?

Conductor DC resistance is approximately 60 Ω per 1000 ft at 20°C and nominal inductance is 0.07 μH/ft.