Technical Documents
Specifications
Brand
STMicroelectronicsProduct Type
Power Management Development Kit
Power Management Function
Power Management
For Use With
Non-Isolated SMPS
Kit Classification
Evaluation Board
Featured Device
VIPER16LD
Kit Name
Demonstration Board
Standards/Approvals
RoHS
Country of Origin
Italy
Product Details
The STEVAL-ISA119V1 is a dual output buck demonstration board using the VIPER16LD, a new off-line high voltage converter by STMicroelectronics which has been specifically developed for non-isolated SMPS. Output regulation is easily achieved through a voltage divider to the output voltage.
The VIPER16LD can work with or without an external supply. In the former case, very low standby consumption is possible(< 50 mW at 265 Vac) while in the latter case, the cost and complication of the IC supply network may be reduced.
The other features of the device include an 800 V avalanche-rugged power section, PWM operation at 60 kHz with frequency jittering for lower EMI, limiting current with adjustable set point, on-board soft-start and safe auto-restart after a fault condition.
The available protection features are thermal shutdown with hysteresis and delayed overload protection.
Stock information temporarily unavailable.
₹ 9,190.95
₹ 9,190.95 Each (Exc. GST)
₹ 10,845.32
₹ 10,845.32 Each (inc. GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 9,190.95
₹ 9,190.95 Each (Exc. GST)
₹ 10,845.32
₹ 10,845.32 Each (inc. GST)
Stock information temporarily unavailable.
1
Technical Documents
Specifications
Brand
STMicroelectronicsProduct Type
Power Management Development Kit
Power Management Function
Power Management
For Use With
Non-Isolated SMPS
Kit Classification
Evaluation Board
Featured Device
VIPER16LD
Kit Name
Demonstration Board
Standards/Approvals
RoHS
Country of Origin
Italy
Product Details
The STEVAL-ISA119V1 is a dual output buck demonstration board using the VIPER16LD, a new off-line high voltage converter by STMicroelectronics which has been specifically developed for non-isolated SMPS. Output regulation is easily achieved through a voltage divider to the output voltage.
The VIPER16LD can work with or without an external supply. In the former case, very low standby consumption is possible(< 50 mW at 265 Vac) while in the latter case, the cost and complication of the IC supply network may be reduced.
The other features of the device include an 800 V avalanche-rugged power section, PWM operation at 60 kHz with frequency jittering for lower EMI, limiting current with adjustable set point, on-board soft-start and safe auto-restart after a fault condition.
The available protection features are thermal shutdown with hysteresis and delayed overload protection.
