TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M6 Stud Size, 1.5mm² to 2.5mm², 16AWG

RS Stock No.: 465-687Brand: TE ConnectivityManufacturers Part No.: DR-6-60
brand-logo
View all in Ring Terminals

Technical Document

Specifications

Series

Duraseal

Insulation

Insulated

Insulation Material

Nylon

Inner Ring Diameter

6.5mm

Outer Ring Diameter

11mm

Minimum Wire Size mm²

1.5mm²

Maximum Wire Size mm²

2.5mm²

Minimum Wire Size AWG

16AWG

Maximum Wire Size AWG

14AWG

Stud Size

M6

Colour

Blue

Contact Plating

Tin

Contact Material

Copper Alloy

Thickness

2mm

Overall Length

36.5mm

Country of Origin

Mexico

Product details

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

₹ 46.36

Each (In a Pack of 50) (Exc. GST)

₹ 54.705

Each (In a Pack of 50) (Including GST)

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M6 Stud Size, 1.5mm² to 2.5mm², 16AWG
Imported by:

RS Components & Controls (I) Ltd

Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301

₹ 46.36

Each (In a Pack of 50) (Exc. GST)

₹ 54.705

Each (In a Pack of 50) (Including GST)

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M6 Stud Size, 1.5mm² to 2.5mm², 16AWG
Stock information temporarily unavailable.

Technical Document

Specifications

Series

Duraseal

Insulation

Insulated

Insulation Material

Nylon

Inner Ring Diameter

6.5mm

Outer Ring Diameter

11mm

Minimum Wire Size mm²

1.5mm²

Maximum Wire Size mm²

2.5mm²

Minimum Wire Size AWG

16AWG

Maximum Wire Size AWG

14AWG

Stud Size

M6

Colour

Blue

Contact Plating

Tin

Contact Material

Copper Alloy

Thickness

2mm

Overall Length

36.5mm

Country of Origin

Mexico

Product details

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed