SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

RS Stock No.: 131-1336Brand: SEGGERManufacturers Part No.: 8.07.01 SWD Isolator
brand-logo
View all in Development Tool Accessories

Technical Document

Specifications

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Product details

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

₹ 31,151.45

Each (Exc. GST)

₹ 36,758.71

Each (Including GST)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes

1

Available in multiples of 1
1₹ 31,151.45
2₹ 62,302.90
3₹ 93,454.35
4₹ 124,605.80
5₹ 155,757.25
6₹ 186,908.70
7₹ 218,060.15
8₹ 249,211.60
9₹ 280,363.05
10₹ 311,514.50
11₹ 342,665.95
12₹ 373,817.40
13₹ 404,968.85
14₹ 436,120.30
15₹ 467,271.75
Imported by:

RS Components & Controls (I) Ltd

Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301

₹ 31,151.45

Each (Exc. GST)

₹ 36,758.71

Each (Including GST)

SEGGER 8.07.01 SWD Isolator Adapter for use with J-Link Probes
Stock information temporarily unavailable.

1

Available in multiples of 1
1₹ 31,151.45
2₹ 62,302.90
3₹ 93,454.35
4₹ 124,605.80
5₹ 155,757.25
6₹ 186,908.70
7₹ 218,060.15
8₹ 249,211.60
9₹ 280,363.05
10₹ 311,514.50
11₹ 342,665.95
12₹ 373,817.40
13₹ 404,968.85
14₹ 436,120.30
15₹ 467,271.75

Technical Document

Specifications

Brand

SEGGER

Accessory Type

Adapter

For Use With

J-Link Probes

Product details

J-Link ARM SWD Isolator Board

The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application.

Compatible Probes

J-Link BASE 131-1319, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM

Features

• 1kV DC optical isolation
• +3.3V and +5Vdc target operation supported
• Powered from probe and target
• SWD 20-pin connection with SWCLK, SWDIO, SWO and RESET signals
• Power consumption on target side: 25mA typical
• SWD frequency: Up to 4MHz
• 3 x LEDs: Probe Power, Target Power and Target RESET