RS PRO Non Contact Voltage Indicator, 230V ac to 1000V ac
Technical Document
Specifications
Brand
RS ProIndicator Type
Voltage
Battery Type
AAA
ATEX Approval
Yes
Power Source
Battery
Safety Category
CAT III 1000 V ac
Weight
50g
Diameter
18mm
Length
151mm
Maximum Detection Voltage
1000V ac
Minimum Detection Voltage
230V ac
Maximum Operating Temperature
+40°C
Minimum Operating Temperature
-20°C
Safety Category Voltage
1000V ac
Safety Category Level
CAT III
Country of Origin
Denmark
Product details
RS Pro Volt Stick Non-Contact Voltage Detector
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.
Features and Benefits:
Voltage Range: 230 V ac - 1000 V ac
Sensitivity: Illuminates red at 4 mm distance from wire carrying 230 V ac
Power: 2 x AAA batteries (Included)
Altitude: < 2000 m
RH: 80% @ 30°C, 50% @ 40°C
Operating Temperature: -20°C to +40°C
Over Voltage: CAT III 1000 V
Weight: 50 gm
Length: 151 mm
Diameter: 18 mm
IEC61010-1 CAT III 1000 V ac
Note
Only use with GP Alkaline GN24A, LR03, Size AAA
What is a non contact voltage tester used for?
Locating breaks in cables
Detecting blown fuses inside plugs of fuse holders
Distinguishing between live and neutral wires in both single and 3 phase supply
Identifying faulty inline switches
Checking function of circuit breakers
Locating defective in-series light bulbs
Stock information temporarily unavailable.
Please check again later.
₹ 7,033.78
Each (Exc. GST)
₹ 8,299.86
Each (inc. GST)
Calibration type
No Calibration
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 7,033.78
Each (Exc. GST)
₹ 8,299.86
Each (inc. GST)
Calibration type
No Calibration
1
Buy in bulk
quantity | Unit price |
---|---|
1 - 4 | ₹ 7,033.78 |
5+ | ₹ 6,612.16 |
Technical Document
Specifications
Brand
RS ProIndicator Type
Voltage
Battery Type
AAA
ATEX Approval
Yes
Power Source
Battery
Safety Category
CAT III 1000 V ac
Weight
50g
Diameter
18mm
Length
151mm
Maximum Detection Voltage
1000V ac
Minimum Detection Voltage
230V ac
Maximum Operating Temperature
+40°C
Minimum Operating Temperature
-20°C
Safety Category Voltage
1000V ac
Safety Category Level
CAT III
Country of Origin
Denmark
Product details
RS Pro Volt Stick Non-Contact Voltage Detector
The Non-Contact VoltStick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the plastic tip to any connection point or move it along an insulated cable. When an AC voltage is detected a red indicator in the plastic tip illuminates, as it detects the live wire through the insulation. Note that if a 3 phase machine is connected up and one of the fuses blows, the voltage is conducted back to the defective fuse the other way and a faulty indication may be given. Make sure that all machines are disconnected before testing. The VoltStick® cannot be used on socket with shielded cable.
Features and Benefits:
Voltage Range: 230 V ac - 1000 V ac
Sensitivity: Illuminates red at 4 mm distance from wire carrying 230 V ac
Power: 2 x AAA batteries (Included)
Altitude: < 2000 m
RH: 80% @ 30°C, 50% @ 40°C
Operating Temperature: -20°C to +40°C
Over Voltage: CAT III 1000 V
Weight: 50 gm
Length: 151 mm
Diameter: 18 mm
IEC61010-1 CAT III 1000 V ac
Note
Only use with GP Alkaline GN24A, LR03, Size AAA
What is a non contact voltage tester used for?
Locating breaks in cables
Detecting blown fuses inside plugs of fuse holders
Distinguishing between live and neutral wires in both single and 3 phase supply
Identifying faulty inline switches
Checking function of circuit breakers
Locating defective in-series light bulbs