RS PRO Mica Heating Pad, 100 W, 230 V ac
Technical Document
Specifications
Brand
RS ProPower Rating
100 W
Peak Temperature
+260°C
Supply Voltage
230 V ac
Dimensions
60 x 60 mm
Country of Origin
China
Product details
Micaflat Heaters
Mica heaters are best used on flat surfaces requiring heating where silicone or film heaters are not suitable for temperatures above 160 °C.
These heaters must be temperature controlled and fitted correctly for best performance.
Flat mica plate heaters are used in applications as e.g.: Dies, Platens, Moulds, Tanks, Process Machinery.
Constructed by winding resistance wire
Insulated and terminal connections fitted
Encased in Zintec sheet which gives good mechanical strength and protection
High temperature surface heating up to 260 °C
Flat Plate Mica Heaters
Used when heat is needed on a flat surface, but when it is impractical to bore a hole in the plate. The flat mica heater allows heat to be distributed evenly across the surface. A much higher watt density can be achieved using these heaters than with silicone rubber mat heaters. 280°C maximum operating temperature.
Stock information temporarily unavailable.
Please check again later.
₹ 4,352.68
Each (Exc. GST)
₹ 5,136.16
Each (Including GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 4,352.68
Each (Exc. GST)
₹ 5,136.16
Each (Including GST)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 4 | ₹ 4,352.68 |
| 5 - 9 | ₹ 4,222.51 |
| 10+ | ₹ 4,130.86 |
Technical Document
Specifications
Brand
RS ProPower Rating
100 W
Peak Temperature
+260°C
Supply Voltage
230 V ac
Dimensions
60 x 60 mm
Country of Origin
China
Product details
Micaflat Heaters
Mica heaters are best used on flat surfaces requiring heating where silicone or film heaters are not suitable for temperatures above 160 °C.
These heaters must be temperature controlled and fitted correctly for best performance.
Flat mica plate heaters are used in applications as e.g.: Dies, Platens, Moulds, Tanks, Process Machinery.
Constructed by winding resistance wire
Insulated and terminal connections fitted
Encased in Zintec sheet which gives good mechanical strength and protection
High temperature surface heating up to 260 °C
Flat Plate Mica Heaters
Used when heat is needed on a flat surface, but when it is impractical to bore a hole in the plate. The flat mica heater allows heat to be distributed evenly across the surface. A much higher watt density can be achieved using these heaters than with silicone rubber mat heaters. 280°C maximum operating temperature.