Phoenix Contact 4-Way PTS 2.5-QUATTRO-PE Earth Terminal Block, 4mm², 26 → 12 AWG Wire, Push In, Polyamide
Technical Document
Specifications
Brand
Phoenix ContactEarth Block Type
PTS 2.5-QUATTRO-PE
Wire Size
26 → 12 AWG
Cable CSA
4mm²
Colour
Green/Yellow
Number Of Ways
4
Termination Method
Push In
Housing Material
Polyamide
Length
49mm
Width
5.2mm
Height
50.5mm
Maximum Operating Temperature
+130°C
Hazardous Area Certification
ATEX, IECEx
Minimum Operating Temperature
-60°C
Country of Origin
Poland
Product details
PTS 2.5 Ground Terminal Blocks
Angled conductor entry
Large space saving when used in concealed wiring systems
Equipped with four bridge shafts to offer a wide range of potential bridging options
Contact is made free from mechanical and electrical errors by simply snapping onto the DIN rail
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Stock information temporarily unavailable.
Please check again later.
₹ 559.33
Each (In a Pack of 5) (Exc. GST)
₹ 660.009
Each (In a Pack of 5) (inc. GST)
5
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 559.33
Each (In a Pack of 5) (Exc. GST)
₹ 660.009
Each (In a Pack of 5) (inc. GST)
5
Technical Document
Specifications
Brand
Phoenix ContactEarth Block Type
PTS 2.5-QUATTRO-PE
Wire Size
26 → 12 AWG
Cable CSA
4mm²
Colour
Green/Yellow
Number Of Ways
4
Termination Method
Push In
Housing Material
Polyamide
Length
49mm
Width
5.2mm
Height
50.5mm
Maximum Operating Temperature
+130°C
Hazardous Area Certification
ATEX, IECEx
Minimum Operating Temperature
-60°C
Country of Origin
Poland
Product details
PTS 2.5 Ground Terminal Blocks
Angled conductor entry
Large space saving when used in concealed wiring systems
Equipped with four bridge shafts to offer a wide range of potential bridging options
Contact is made free from mechanical and electrical errors by simply snapping onto the DIN rail
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.