Osram Opto SPL CG81-2S IR Laser Diode 811nm, 2-Pin
Technical Document
Specifications
Peak Wavelength
811nm
Laser Type
Continuous Wave
Number of Pins
2
Laser Colour
Infrared
Maximum Operating Current
2600mA
Dimensions
7.1 x 6.6 x 2.3mm
Length
7.1mm
Width
6.6mm
Height
2.3mm
Maximum Supply Voltage
2.1V
Minimum Supply Voltage
2.1V
Reverse Voltage
3V
Supply Voltage Range
1.7 → 2.1 V
Country of Origin
Malaysia
Product details
IR Continuous Wave Laser Diode
Efficient single emitter radiation source for continuous wave (CW) and pulsed operation. Applications include: pumping of solid state and fibre lasers, soldering, heating, illumination, printing, marking, surface processing, medical applications, testing and measurement.
Reliable InGa(Al)As quantum-well structure
Low threshold current
Lateral laser aperture 200μm
38° x 7° beam divergence
Small C-type copper sub-mount
Warning
These laser diodes are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye.
Laser Diodes, OSRAM Opto Semiconductors
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
P.O.A.
1
Technical Document
Specifications
Peak Wavelength
811nm
Laser Type
Continuous Wave
Number of Pins
2
Laser Colour
Infrared
Maximum Operating Current
2600mA
Dimensions
7.1 x 6.6 x 2.3mm
Length
7.1mm
Width
6.6mm
Height
2.3mm
Maximum Supply Voltage
2.1V
Minimum Supply Voltage
2.1V
Reverse Voltage
3V
Supply Voltage Range
1.7 → 2.1 V
Country of Origin
Malaysia
Product details
IR Continuous Wave Laser Diode
Efficient single emitter radiation source for continuous wave (CW) and pulsed operation. Applications include: pumping of solid state and fibre lasers, soldering, heating, illumination, printing, marking, surface processing, medical applications, testing and measurement.
Reliable InGa(Al)As quantum-well structure
Low threshold current
Lateral laser aperture 200μm
38° x 7° beam divergence
Small C-type copper sub-mount
Warning
These laser diodes are OEM devices and conform to the emission criteria of BS (EN) 60825. It is recommended that this standard and the Data Sheet are read before these lasers are used. Serious eye damage may result if any laser of 1mW or above is pointed directly at the eye.