Take Up Bearing Unit, ST50, 50mm ID

RS Stock No.: 243-5644Brand: NSK-RHPManufacturers Part No.: ST50
brand-logo
View all in Bearing Units

Technical Document

Specifications

Brand

NSK-RHP

Inside Diameter

50mm

Bearing Unit Type

Take Up Bearing Unit

Material

Cast Iron

Length

151mm

Width

118mm

Depth

49.5mm

Product details

Self Lube Bearing Take-Up Unit

Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.

Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals

Supplied with

grease nipples

Bearing Take-Up Units

Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.

₹ 10,631.41

₹ 10,631.41 Each (Exc. GST)

₹ 12,545.06

₹ 12,545.06 Each (inc. GST)

Take Up Bearing Unit, ST50, 50mm ID

1

Available in multiples of 1
1₹ 10,631.41
2₹ 21,262.82
3₹ 31,894.23
4₹ 42,525.64
5₹ 53,157.05
6₹ 63,788.46
7₹ 74,419.87
8₹ 85,051.28
9₹ 95,682.69
10₹ 106,314.10
11₹ 116,945.51
12₹ 127,576.92
13₹ 138,208.33
14₹ 148,839.74
15₹ 159,471.15
Imported by:

RS Components & Controls (I) Ltd

Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301

₹ 10,631.41

₹ 10,631.41 Each (Exc. GST)

₹ 12,545.06

₹ 12,545.06 Each (inc. GST)

Take Up Bearing Unit, ST50, 50mm ID

Stock information temporarily unavailable.

1

Available in multiples of 1
1₹ 10,631.41
2₹ 21,262.82
3₹ 31,894.23
4₹ 42,525.64
5₹ 53,157.05
6₹ 63,788.46
7₹ 74,419.87
8₹ 85,051.28
9₹ 95,682.69
10₹ 106,314.10
11₹ 116,945.51
12₹ 127,576.92
13₹ 138,208.33
14₹ 148,839.74
15₹ 159,471.15

Stock information temporarily unavailable.

Technical Document

Specifications

Brand

NSK-RHP

Inside Diameter

50mm

Bearing Unit Type

Take Up Bearing Unit

Material

Cast Iron

Length

151mm

Width

118mm

Depth

49.5mm

Product details

Self Lube Bearing Take-Up Unit

Take-up units are used to “take up” the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension.

Made from cast iron to BS1452
Spherical bearing insert accommodates initial misalignment
Nitrile/fabric seals

Supplied with

grease nipples

Bearing Take-Up Units

Take-up units are often used where shaft or belt adjustment/tightening is required, and are often seen installed within conveyor systems. The units may also be installed within food processing environments and used for agricultural equipment applications.