Molex Premise Networks ST to ST Duplex Multi Mode OM1 Fibre Optic Cable, 62.5/125μm, Orange, 2m
Technical Document
Specifications
Connector 1
ST
Length
2m
Propagation Mode
Multi Mode
Connector 2
ST
Terminated/Unterminated
Terminated
Core Diameter
62.5/125µm
Sheath Colour
Orange
Cable Construction
Duplex
Fibre Type
OM1
Maximum Operating Temperature
+85°C
Attenuation
1 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Series
91
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3
Stock information temporarily unavailable.
Please check again later.
₹ 2,509.89
Each (Exc. GST)
₹ 2,961.67
Each (inc. GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 2,509.89
Each (Exc. GST)
₹ 2,961.67
Each (inc. GST)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 14 | ₹ 2,509.89 |
| 15 - 49 | ₹ 2,399.16 |
| 50+ | ₹ 2,330.61 |
Technical Document
Specifications
Connector 1
ST
Length
2m
Propagation Mode
Multi Mode
Connector 2
ST
Terminated/Unterminated
Terminated
Core Diameter
62.5/125µm
Sheath Colour
Orange
Cable Construction
Duplex
Fibre Type
OM1
Maximum Operating Temperature
+85°C
Attenuation
1 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Series
91
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3