Megger MFT1711 Multifunction Tester, 250V , Earth Resistance Measurement With Wireless RS Calibration
Technical Document
Specifications
Brand
MeggerLoop Impedance Test Type
2 Wire, 3 Wire
Calibrated
RSCAL
Automatic RCD Test
Yes
Model Number p
MFT1711
RCD Ramp Test
Yes
Model Number (p)
MFT1711
Non-Tripping
Yes
Insulation Test Voltage
250 V, 500 V, 1000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
No
Interface Type
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, S
IP Rating
IP54
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
Minimum Operating Temperature
-10°C
Height
150mm
Operating Temperature Range
-10 → +55 °C
Continuity Range
0 → 100 kO
Weight
1 (with Battery; Excluding Case)kg
Safety Category Level
CAT III, CAT IV
Plug Type
BS 1363, LT 300-EN-BS
Power Source
Battery
Width
235mm
Length
85mm
Dimensions
85 x 235 x 150mm
Minimum Continuity Resistance
0.01Ω
Safety Category
CAT III 600 V, CAT IV 300 V
Maximum Continuity Resistance
99.9kΩ
Safety Category Voltage
300 V, 600 V
Voltage Measurement Range
10 → 600V
Battery Type
AA Alkaline
Display Type
LCD
Maximum Operating Temperature
+55°C
Country of Origin
United Kingdom
Product details
Megger New MFT1700 Series
The new MFT1700 series from Megger tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The new MFT1700 series includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited and a warning beep sounds.
MFT1731 On-Site option is available complete with PowerSuite® Lite software. MFT1731 On-Site provides a professional solution to certification with electronic form completion from stored data within the MFT. Download to a mobile device such as a Smartphone or direct to a PC.
Options in the series include
MFT1711 (RS 117-6026)
MFT1721 (RS 117-6027)
MFT1731 (RS 117-6028)
Features
Simple colour-coded test selection
Large clear backlit display for ease of use
Dual TEST and LOCK buttons, easy to use left or right handed
Two and three wire non-trip loop testing for RCD protected circuits
Type-B RCD and 3 phase RCD testing for industrial applications with no Earth - MFT1721 and MFT1731 ONLY.
3-terminal earth test and stake less testing for electrode resistance measurement
EN61010 CAT IV safety rating
Fully compliant with IEC 60364, VDE 0100 & BS7671
Durable IP54 case
Lightweight, compact design
Onsite Features
Bluetooth downloading
Onsite Software
Memory option
Rechargeable cells
200 mA test with option of 15 mA
3 pole earth test
Complete certificates on-site as you go or stores the data until you get home
Send results from MFT1731 tester direct to the correct location on the certificate
Reduce errors
Increase productivity
Saves you hours of form filling
Software Package - Basic FormFiller Certification
Operators can access and download for free the software package from Megger via the web site. Offering users a quick and simple solution to create and store standard IET certification forms and PAT certificates. Suitable for use on Windows® platforms running JAVA 8. FormFiller provides a simple, intuitive form completion tool, allowing professional printed certificates and documentation to be produced with negligible software skills. All certificates and forms can be stored within the application or exported in PDF form.
Features
• Simple operational interface
• Storage of completed forms with retrieval by certificate type or client
• PDF export facility for safe and simple distribution
• Multi-page Schedules for testing larger installations
• Drop down fields to speed up certificate completion
Supplied with
MFT1711 (RS 117-6026) - Tester, three wire lead set, mains test lead, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case.
MFT1721 (RS 117-6027) - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case.
MFT1731 (RS 117-6028) - Tester, three wire lead set, mains test lead, switched probe, internally rechargeable batteries and charger, 12-month calibration certificate, warranty upgradeable to 3 years & soft pouch.
Stock information temporarily unavailable.
Please check again later.
₹ 145,369.88
Each (Exc. GST)
₹ 171,536.46
Each (inc. GST)
Calibration type
RS Calibration
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 145,369.88
Each (Exc. GST)
₹ 171,536.46
Each (inc. GST)
Calibration type
RS Calibration
1
Technical Document
Specifications
Brand
MeggerLoop Impedance Test Type
2 Wire, 3 Wire
Calibrated
RSCAL
Automatic RCD Test
Yes
Model Number p
MFT1711
RCD Ramp Test
Yes
Model Number (p)
MFT1711
Non-Tripping
Yes
Insulation Test Voltage
250 V, 500 V, 1000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
No
Interface Type
Wireless
Continuity Test Current
200mA
RCD Test Type
A, AC, S
IP Rating
IP54
Test Standards
EC 61010-1:2010, IEC 61010-031:2008, IEC 61010-30:2010, IEC 61557:2007
Minimum Operating Temperature
-10°C
Height
150mm
Operating Temperature Range
-10 → +55 °C
Continuity Range
0 → 100 kO
Weight
1 (with Battery; Excluding Case)kg
Safety Category Level
CAT III, CAT IV
Plug Type
BS 1363, LT 300-EN-BS
Power Source
Battery
Width
235mm
Length
85mm
Dimensions
85 x 235 x 150mm
Minimum Continuity Resistance
0.01Ω
Safety Category
CAT III 600 V, CAT IV 300 V
Maximum Continuity Resistance
99.9kΩ
Safety Category Voltage
300 V, 600 V
Voltage Measurement Range
10 → 600V
Battery Type
AA Alkaline
Display Type
LCD
Maximum Operating Temperature
+55°C
Country of Origin
United Kingdom
Product details
Megger New MFT1700 Series
The new MFT1700 series from Megger tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The new MFT1700 series includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited and a warning beep sounds.
MFT1731 On-Site option is available complete with PowerSuite® Lite software. MFT1731 On-Site provides a professional solution to certification with electronic form completion from stored data within the MFT. Download to a mobile device such as a Smartphone or direct to a PC.
Options in the series include
MFT1711 (RS 117-6026)
MFT1721 (RS 117-6027)
MFT1731 (RS 117-6028)
Features
Simple colour-coded test selection
Large clear backlit display for ease of use
Dual TEST and LOCK buttons, easy to use left or right handed
Two and three wire non-trip loop testing for RCD protected circuits
Type-B RCD and 3 phase RCD testing for industrial applications with no Earth - MFT1721 and MFT1731 ONLY.
3-terminal earth test and stake less testing for electrode resistance measurement
EN61010 CAT IV safety rating
Fully compliant with IEC 60364, VDE 0100 & BS7671
Durable IP54 case
Lightweight, compact design
Onsite Features
Bluetooth downloading
Onsite Software
Memory option
Rechargeable cells
200 mA test with option of 15 mA
3 pole earth test
Complete certificates on-site as you go or stores the data until you get home
Send results from MFT1731 tester direct to the correct location on the certificate
Reduce errors
Increase productivity
Saves you hours of form filling
Software Package - Basic FormFiller Certification
Operators can access and download for free the software package from Megger via the web site. Offering users a quick and simple solution to create and store standard IET certification forms and PAT certificates. Suitable for use on Windows® platforms running JAVA 8. FormFiller provides a simple, intuitive form completion tool, allowing professional printed certificates and documentation to be produced with negligible software skills. All certificates and forms can be stored within the application or exported in PDF form.
Features
• Simple operational interface
• Storage of completed forms with retrieval by certificate type or client
• PDF export facility for safe and simple distribution
• Multi-page Schedules for testing larger installations
• Drop down fields to speed up certificate completion
Supplied with
MFT1711 (RS 117-6026) - Tester, three wire lead set, mains test lead, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case.
MFT1721 (RS 117-6027) - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case.
MFT1731 (RS 117-6028) - Tester, three wire lead set, mains test lead, switched probe, internally rechargeable batteries and charger, 12-month calibration certificate, warranty upgradeable to 3 years & soft pouch.