Technical Document
Specifications
Brand
KopexNominal Size
20mm
Fitting Type
Thread Converter
Thread Size
3/4 in NPT → M20
Material
Brass
IP Rating
IP66
Series
EX/TC
Country of Origin
United Kingdom
Product details
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.
Kopex Ex-System
Stock information temporarily unavailable.
Please check again later.
₹ 895.42
Each (In a Pack of 5) (Exc. GST)
₹ 1,056.596
Each (In a Pack of 5) (Including GST)
5
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 895.42
Each (In a Pack of 5) (Exc. GST)
₹ 1,056.596
Each (In a Pack of 5) (Including GST)
5
Buy in bulk
quantity | Unit price | Per Pack |
---|---|---|
5 - 45 | ₹ 895.42 | ₹ 4,477.10 |
50 - 245 | ₹ 870.20 | ₹ 4,351.00 |
250+ | ₹ 846.36 | ₹ 4,231.80 |
Technical Document
Specifications
Brand
KopexNominal Size
20mm
Fitting Type
Thread Converter
Thread Size
3/4 in NPT → M20
Material
Brass
IP Rating
IP66
Series
EX/TC
Country of Origin
United Kingdom
Product details
Thread Converters
A range of Kopex brass fittings which provide a method of matching thread forms on hazardous area approved equipment whilst ensuring the integrity and Ex approval of the installation is maintained. These thread converters meet the latest ATEX/IECEx standards and have them clearly marked on the main body of the product, allowing them to be seen easily once installed, a key component of the new standard.,Enlargers (/E) are used where the thread size of the female side of the device is larger than the male side.,Reducers (/R) are used where the thread size of the female side of the device is smaller than the male side.,Adapters (/TC) are used where a conversion is required between thread types e.g. Metric to PG.
Approvals
ATEX Certification. BASEEFA07 ATEX 0247X, IECEx Certification. IECEx BAS07.0090X.