ITW Devcon Adhesive Syringe Gun 200ml
Technical Document
Specifications
Product details
Epoxy Adhesive, Epoxy Plus®
A rubber toughened, high viscosity, non-corrosive, structural adhesive. Formulated for superior peel, impact and fatigue resistance and is suitable for use on metals, thermoset plastics and structural parts
Working time 25 minutes, handling strength 4 to 5 hours
Tensile shear strength 17.24N/mm2
High viscosity for increased gap filling
Available in 1:1 ratio cartridge
Resistant to Solvents
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.
Stock information temporarily unavailable.
Please check again later.
₹ 21,642.09
Each (Exc. GST)
₹ 25,537.67
Each (inc. GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 21,642.09
Each (Exc. GST)
₹ 25,537.67
Each (inc. GST)
1
Technical Document
Specifications
Product details
Epoxy Adhesive, Epoxy Plus®
A rubber toughened, high viscosity, non-corrosive, structural adhesive. Formulated for superior peel, impact and fatigue resistance and is suitable for use on metals, thermoset plastics and structural parts
Working time 25 minutes, handling strength 4 to 5 hours
Tensile shear strength 17.24N/mm2
High viscosity for increased gap filling
Available in 1:1 ratio cartridge
Resistant to Solvents
ITW Devcon Structural Adhesives
Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.