Technical Document
Specifications
Brand
HengstlerSupply Voltage
24 V dc
Count Mode
Impulses
Input Type
Voltage
Connection Type
Screw
Reset Method
No Reset
Number Of Digits
6
Mounting Type
Panel Mount
Count Direction
Up
Digit Height
4 mm
Maximum Count Frequency
10Hz
Minimum Operating Temperature
-10°C
Series
635
Weight
20g
Maximum Operating Temperature
+50°C
Country of Origin
Slovakia
Product details
Non Reset Totalising Magnified Display
Low power counters
Display magnified by a transparent window
High shock resistant
Translucent plastic housing
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
Stock information temporarily unavailable.
Please check again later.
₹ 4,794.98
Each (Exc. GST)
₹ 5,658.08
Each (Including GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 4,794.98
Each (Exc. GST)
₹ 5,658.08
Each (Including GST)
1
Buy in bulk
quantity | Unit price |
---|---|
1 - 4 | ₹ 4,794.98 |
5 - 9 | ₹ 4,644.89 |
10+ | ₹ 4,539.96 |
Technical Document
Specifications
Brand
HengstlerSupply Voltage
24 V dc
Count Mode
Impulses
Input Type
Voltage
Connection Type
Screw
Reset Method
No Reset
Number Of Digits
6
Mounting Type
Panel Mount
Count Direction
Up
Digit Height
4 mm
Maximum Count Frequency
10Hz
Minimum Operating Temperature
-10°C
Series
635
Weight
20g
Maximum Operating Temperature
+50°C
Country of Origin
Slovakia
Product details
Non Reset Totalising Magnified Display
Low power counters
Display magnified by a transparent window
High shock resistant
Translucent plastic housing
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.