HARTING, D-Sub Standard Series, Male Crimp D-sub Connector Contact, Gold over Nickel Pin, 24 → 20 AWG
Technical Document
Specifications
Brand
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Termination Method
Crimp
Contact Plating
Gold over Nickel
Contact Type
Pin
Series
D-Sub Standard
Length
14.48mm
Product details
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807
Stock information temporarily unavailable.
Please check again later.
₹ 20.14
Each (On a Reel of 500) (Exc. GST)
₹ 23.765
Each (On a Reel of 500) (Including GST)
500
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 20.14
Each (On a Reel of 500) (Exc. GST)
₹ 23.765
Each (On a Reel of 500) (Including GST)
500
Buy in bulk
| quantity | Unit price | Per Reel |
|---|---|---|
| 500 - 24500 | ₹ 20.14 | ₹ 10,070.00 |
| 25000 - 49500 | ₹ 15.00 | ₹ 7,500.00 |
| 50000 - 124500 | ₹ 14.62 | ₹ 7,310.00 |
| 125000 - 249500 | ₹ 14.32 | ₹ 7,160.00 |
| 250000+ | ₹ 14.07 | ₹ 7,035.00 |
Technical Document
Specifications
Brand
HartingGender
Male
Wire Size
24 → 20 AWG
Contact Material
Brass
Termination Method
Crimp
Contact Plating
Gold over Nickel
Contact Type
Pin
Series
D-Sub Standard
Length
14.48mm
Product details
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807