Harting, D-Sub Standard Series, Male Crimp D-sub Connector Contact, Gold over Nickel Signal, 28 → 24 AWG
Technical Document
Specifications
Brand
HartingGender
Male
Wire Size
28 → 24 AWG
Contact Material
Brass
Contact Plating
Gold over Nickel
Termination Method
Crimp
Contact Type
Signal
Maximum Contact Resistance
10mΩ
Series
D-Sub Standard
Current Rating
7.5A
Length
14.48mm
Country of Origin
Germany
Product details
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807
Stock information temporarily unavailable.
Please check again later.
₹ 17.77
Each (In a Pack of 100) (Exc. GST)
₹ 20.969
Each (In a Pack of 100) (Including GST)
100
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 17.77
Each (In a Pack of 100) (Exc. GST)
₹ 20.969
Each (In a Pack of 100) (Including GST)
100
Buy in bulk
| quantity | Unit price | Per Pack |
|---|---|---|
| 100 - 4900 | ₹ 17.77 | ₹ 1,777.00 |
| 5000 - 9900 | ₹ 15.10 | ₹ 1,510.00 |
| 10000 - 24900 | ₹ 14.73 | ₹ 1,473.00 |
| 25000 - 49900 | ₹ 14.37 | ₹ 1,437.00 |
| 50000+ | ₹ 13.86 | ₹ 1,386.00 |
Technical Document
Specifications
Brand
HartingGender
Male
Wire Size
28 → 24 AWG
Contact Material
Brass
Contact Plating
Gold over Nickel
Termination Method
Crimp
Contact Type
Signal
Maximum Contact Resistance
10mΩ
Series
D-Sub Standard
Current Rating
7.5A
Length
14.48mm
Country of Origin
Germany
Product details
Harting Sub-D Connector Crimp Contacts and Tooling
From Harting, a range of Male and female contacts for crimping onto wires with cross sections between 28 - 20 AWG, suitable for Harting D-Sub connectors. The range also includes an appropriate crimp tool for use with male and female cut and formed contacts, and an insertion removal tool.
Appropriate tooling for Harting D-sub crimps includes the following:
• Stock number 740-6657 is an Insertion and Extraction Tool
• Stock number 100-8566 is a Manual Crimp Tool
Standards
IEC 60 807