LCBSBM-8-01 ART, 12.7mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
Technical Document
Specifications
Brand
EssentraPCB Support Type
Adhesive-Backed Support
Overall Height
21.4mm
Body Height
12.7mm
Support Base Dimensions
12.7 x 12.7mm
PCB Hole Diameter
3.18mm
PCB Thickness
1.57mm
Material
Nylon
Support Base Length
12.7mm
Support Base Width
12.7mm
Country of Origin
United Kingdom
Product details
Miniature Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
₹ 726.50
₹ 14.53 Each (In a Pack of 50) (Exc. GST)
₹ 857.27
₹ 17.145 Each (In a Pack of 50) (inc. GST)
50
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 726.50
₹ 14.53 Each (In a Pack of 50) (Exc. GST)
₹ 857.27
₹ 17.145 Each (In a Pack of 50) (inc. GST)
50
Stock information temporarily unavailable.
Please check again later.
| quantity | Unit price | Per Pack |
|---|---|---|
| 50 - 450 | ₹ 14.53 | ₹ 726.50 |
| 500 - 950 | ₹ 14.33 | ₹ 716.50 |
| 1000 - 2450 | ₹ 13.96 | ₹ 698.00 |
| 2500+ | ₹ 13.78 | ₹ 689.00 |
Technical Document
Specifications
Brand
EssentraPCB Support Type
Adhesive-Backed Support
Overall Height
21.4mm
Body Height
12.7mm
Support Base Dimensions
12.7 x 12.7mm
PCB Hole Diameter
3.18mm
PCB Thickness
1.57mm
Material
Nylon
Support Base Length
12.7mm
Support Base Width
12.7mm
Country of Origin
United Kingdom
Product details
Miniature Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm