Bridgetek FT90x, Programming Module

RS Stock No.: 901-5092Brand: BridgetekManufacturers Part No.: UMFTPD2A
brand-logo
View all in Chip Programmers

Technical Document

Specifications

Accessory Type

Programming Module

Programmer Name

FT90x

Country of Origin

China

Product details

UMFTPD2A Program/Debug Module

The UMFTPD2A module is used for programming/debugging the FT90x series of 32-bit microcontrollers. It provides a USB connection from a PC to the 1-wire program/debug port of the FT90x chip.

FT4232H USB 2.0 Hi-Speed (480Mb/s) to 4 x UART converter
Channel A: serial UART I/O One-Wire program/debug interface
Channel B: MPSSE interface for EFUSE program
Channel C: serial UART I/O for general purpose use
Channel D: Bit-Bang port GPIO for general purpose use
2 x 5-pin 1.27mm pitch Micro-MaTch socket
2 x 6-pin 2.54mm pitch through hole pin header
USB Micro-B host socket also supplies power
3 x power supply LEDs

Supplied with

Micro-MaTch Male to Male 10W ribbon cable

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

₹ 3,485.70

Each (Exc. GST)

₹ 4,113.13

Each (Including GST)

Bridgetek FT90x, Programming Module
Imported by:

RS Components & Controls (I) Ltd

Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301

₹ 3,485.70

Each (Exc. GST)

₹ 4,113.13

Each (Including GST)

Bridgetek FT90x, Programming Module
Stock information temporarily unavailable.

Technical Document

Specifications

Accessory Type

Programming Module

Programmer Name

FT90x

Country of Origin

China

Product details

UMFTPD2A Program/Debug Module

The UMFTPD2A module is used for programming/debugging the FT90x series of 32-bit microcontrollers. It provides a USB connection from a PC to the 1-wire program/debug port of the FT90x chip.

FT4232H USB 2.0 Hi-Speed (480Mb/s) to 4 x UART converter
Channel A: serial UART I/O One-Wire program/debug interface
Channel B: MPSSE interface for EFUSE program
Channel C: serial UART I/O for general purpose use
Channel D: Bit-Bang port GPIO for general purpose use
2 x 5-pin 1.27mm pitch Micro-MaTch socket
2 x 6-pin 2.54mm pitch through hole pin header
USB Micro-B host socket also supplies power
3 x power supply LEDs

Supplied with

Micro-MaTch Male to Male 10W ribbon cable