4D Systems, 4DPI-35 MK2 Primary with 3.5in Resistive Touch Screen
Technical Document
Specifications
Brand
4D SystemsDiagonal Display Size
3.5in
Display Technology
Resistive Touch Screen
Kit Name
4DPI-35 MK2 Primary
Country of Origin
Australia
Product details
Primary Touch Screens for Raspberry Pi 3, Pi 2, A+ and B+, 4D Systems
Add a primary touch screen to your Raspberry Pi quickly and easily with a display from 4D Systems. Available in two sizes: 3.2 inch (RS 909-4105) and 3.5 inch (RS 909-4108), both of which attach via the 40 way header. Power for the screen is supplied from the Raspberry Pi so there is no need for an additional power supply. Installation and set up with your Raspberry Pi can be completed in just a few minutes using the software download available from the 4D Systems website.
- 4 wire resistive touch screen
- 4 corner plates with 2.6mm holes for wall mounting
- Typical frame rate of 17FPS
- High speed 48MHz SPI connection with the Raspberry Pi with compression technology
- On/Off or PWM controlled LED backlight
- Optional bezels are available for the 3.2 inch screen for that professional finish
4D Systems Display Accessories
Stock information temporarily unavailable.
Please check again later.
₹ 7,755.89
Each (Exc. GST)
₹ 9,151.95
Each (inc. GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 7,755.89
Each (Exc. GST)
₹ 9,151.95
Each (inc. GST)
1
Technical Document
Specifications
Brand
4D SystemsDiagonal Display Size
3.5in
Display Technology
Resistive Touch Screen
Kit Name
4DPI-35 MK2 Primary
Country of Origin
Australia
Product details
Primary Touch Screens for Raspberry Pi 3, Pi 2, A+ and B+, 4D Systems
Add a primary touch screen to your Raspberry Pi quickly and easily with a display from 4D Systems. Available in two sizes: 3.2 inch (RS 909-4105) and 3.5 inch (RS 909-4108), both of which attach via the 40 way header. Power for the screen is supplied from the Raspberry Pi so there is no need for an additional power supply. Installation and set up with your Raspberry Pi can be completed in just a few minutes using the software download available from the 4D Systems website.
- 4 wire resistive touch screen
- 4 corner plates with 2.6mm holes for wall mounting
- Typical frame rate of 17FPS
- High speed 48MHz SPI connection with the Raspberry Pi with compression technology
- On/Off or PWM controlled LED backlight
- Optional bezels are available for the 3.2 inch screen for that professional finish
4D Systems Display Accessories