Sauter HB0 100-0HB0 100-0. Durometer
Technical Document
Specifications
Brand
SauterShore Scale
Shore A0
Tester Type
Durometer
Indenter
Ball Head
Graduation
1
Weight
160g
Dimensions L x W x D
115 x 60 x 25mm
Dimensions (L x W x D)
115 x 60 x 25mm
Country of Origin
China
Product details
Kern Analogue Shore Hardness Tester
A compact hand held durometer with drag indicator. Ideal for internal comparison measurement. Supplied in a wooden carrying case for safe and secure storage.
Typical Application
• Measurement of penetration (Shore)
Feature and Benefits
• Mechanical shore hardness meter
• For internal comparison measurement. Standard calibrations e.g. to DIN 53505 are often not possible because of narrow standard tolerances
• Shore A: Rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
• Shore D: Plastics, Formica, epoxies, plexi glass etc.
• Shore A0: Foam, sponge etc.
• Max Mode: Holds the maximum value in the display
• Point Mode: Shows one instant value
• Can be attached to test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D)
• Tester Shore A0
Parallels, Surface Finish & Hardness
Surface Finish
Stock information temporarily unavailable.
Please check again later.
₹ 16,125.17
Each (Exc. GST)
₹ 19,027.70
Each (inc. GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 16,125.17
Each (Exc. GST)
₹ 19,027.70
Each (inc. GST)
1
Technical Document
Specifications
Brand
SauterShore Scale
Shore A0
Tester Type
Durometer
Indenter
Ball Head
Graduation
1
Weight
160g
Dimensions L x W x D
115 x 60 x 25mm
Dimensions (L x W x D)
115 x 60 x 25mm
Country of Origin
China
Product details
Kern Analogue Shore Hardness Tester
A compact hand held durometer with drag indicator. Ideal for internal comparison measurement. Supplied in a wooden carrying case for safe and secure storage.
Typical Application
• Measurement of penetration (Shore)
Feature and Benefits
• Mechanical shore hardness meter
• For internal comparison measurement. Standard calibrations e.g. to DIN 53505 are often not possible because of narrow standard tolerances
• Shore A: Rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar material
• Shore D: Plastics, Formica, epoxies, plexi glass etc.
• Shore A0: Foam, sponge etc.
• Max Mode: Holds the maximum value in the display
• Point Mode: Shows one instant value
• Can be attached to test stands SAUTER TI-A0 (for Shore A and A0), TI-D. (for Shore D)
• Tester Shore A0
Parallels, Surface Finish & Hardness
Surface Finish