RS PRO Heating Element, 130 W, 240 V ac
Technical Document
Specifications
Brand
RS ProElement Type
Band Heater
Power Rating
130 W
Supply Voltage
240 V ac
Width
1in
Diameter
51 mm
Peak Temperature
+300°C
Lead Length
1m
Country of Origin
China
Product details
Sealed Mica Nozzle Heaters
These nozzle heaters are hermetically sealed for liquid plastic within the manufacturing process. These types of heaters are used to give long life where normal mica heaters cannot last as long due to process leakages.
These heaters are typically used on injection moulding machines, extruders, dies, moulds and process machinery.
Constructed by winding resistance wire
Insulated and terminal connections fitted
Encased in brass casing which gives good mechanical strength and protection
Supply voltage is 230 V
Up to 300 °C
Cable length is 1m
Available in various sizes
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.
Stock information temporarily unavailable.
Please check again later.
₹ 4,627.23
Each (Exc. GST)
₹ 5,460.13
Each (inc. GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 4,627.23
Each (Exc. GST)
₹ 5,460.13
Each (inc. GST)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 4 | ₹ 4,627.23 |
| 5 - 9 | ₹ 4,423.09 |
| 10+ | ₹ 4,296.71 |
Technical Document
Specifications
Brand
RS ProElement Type
Band Heater
Power Rating
130 W
Supply Voltage
240 V ac
Width
1in
Diameter
51 mm
Peak Temperature
+300°C
Lead Length
1m
Country of Origin
China
Product details
Sealed Mica Nozzle Heaters
These nozzle heaters are hermetically sealed for liquid plastic within the manufacturing process. These types of heaters are used to give long life where normal mica heaters cannot last as long due to process leakages.
These heaters are typically used on injection moulding machines, extruders, dies, moulds and process machinery.
Constructed by winding resistance wire
Insulated and terminal connections fitted
Encased in brass casing which gives good mechanical strength and protection
Supply voltage is 230 V
Up to 300 °C
Cable length is 1m
Available in various sizes
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.