Molex Premise Networks SC to SC Duplex Multi Mode OM3 Fibre Optic Cable, 50/125μm, Aqua, 2m
Technical Document
Specifications
Connector 1
SC
Length
2m
Connector 2
SC
Propagation Mode
Multi Mode
Terminated/Unterminated
Terminated
Core Diameter
50/125µm
Sheath Colour
Aqua
Cable Construction
Duplex
Fibre Type
OM3
Maximum Operating Temperature
+85°C
Attenuation
1.5 dB
Sheath Material
PVC
Minimum Operating Temperature
-40°C
Series
91
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3
Stock information temporarily unavailable.
Please check again later.
₹ 3,150.92
Each (Exc. GST)
₹ 3,718.09
Each (inc. GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 3,150.92
Each (Exc. GST)
₹ 3,718.09
Each (inc. GST)
1
Buy in bulk
| quantity | Unit price |
|---|---|
| 1 - 14 | ₹ 3,150.92 |
| 15 - 49 | ₹ 3,011.91 |
| 50+ | ₹ 2,925.86 |
Technical Document
Specifications
Connector 1
SC
Length
2m
Connector 2
SC
Propagation Mode
Multi Mode
Terminated/Unterminated
Terminated
Core Diameter
50/125µm
Sheath Colour
Aqua
Cable Construction
Duplex
Fibre Type
OM3
Maximum Operating Temperature
+85°C
Attenuation
1.5 dB
Sheath Material
PVC
Minimum Operating Temperature
-40°C
Series
91
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3