Technical Document
Specifications
Product details
Pmod Shield-Uno Arduino Adapter
The Pmod Shield-Uno is an expansion board compatible with the PIC32MX-based uC32 board (RS 775-7346). The board provides five Digilent 12-pin Pmod™ connectors for Digilent peripheral modules. Note: when plugged into a standard Arduino Uno R3 format processor board, only two Pmod connectors are available. See compatibility guide under 'Technical Reference'.
Designed to help connect a range of Pmods directly, the additional circuitry and connectors on the Pmod shield-uno removes the need for countless cables and wires for connection making it cleaner and far easier to assemble your board.
Whats on-board?
5 x 12-pin (2x6) Pmod connectors with TVS ESD protection
Jumper links for each Pmod connector to select +3.3/+5V power supply
6-pin header for SPI serial bus
I²C serial bus daisy-chain connector
GPIO, SPI, UART, and I2C support
Jumper links for optional 2.2kΩ pull-ups on I²C bus SDA/SCL pins
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
P.O.A.
1
Technical Document
Specifications
Product details
Pmod Shield-Uno Arduino Adapter
The Pmod Shield-Uno is an expansion board compatible with the PIC32MX-based uC32 board (RS 775-7346). The board provides five Digilent 12-pin Pmod™ connectors for Digilent peripheral modules. Note: when plugged into a standard Arduino Uno R3 format processor board, only two Pmod connectors are available. See compatibility guide under 'Technical Reference'.
Designed to help connect a range of Pmods directly, the additional circuitry and connectors on the Pmod shield-uno removes the need for countless cables and wires for connection making it cleaner and far easier to assemble your board.
Whats on-board?
5 x 12-pin (2x6) Pmod connectors with TVS ESD protection
Jumper links for each Pmod connector to select +3.3/+5V power supply
6-pin header for SPI serial bus
I²C serial bus daisy-chain connector
GPIO, SPI, UART, and I2C support
Jumper links for optional 2.2kΩ pull-ups on I²C bus SDA/SCL pins