SEGGER 5.16.01 Flasher Portable In Circuit Programmer for use with Flash microcontrollers

RS Stock No.: 131-1334Brand: SEGGERManufacturers Part No.: 5.16.01
brand-logo
View all in Development Tool Accessories

Technical Document

Specifications

Brand

SEGGER

Accessory Type

In Circuit Programmer

For Use With

Flash microcontrollers

Product details

Flasher Portable Programmer

Flasher Portable has been designed to fill the need for a portable, battery-operated production-grade Flash memory programmer used for in-field firmware updates. Initial setup/preparation for stand-alone mode operation is done via the J-Flash software. It supports storage of multiple configurations/image files, so one unit can be used for different targets.

Supported Processors

• ARM 7/9/11
• ARM Cortex-A5/A7/A8/A9/A12/A15/A17
• ARM Cortex-M0/M0+/M1/M3/M4/M7
• ARM Cortex-R4/R5
• Freescale e200z0 (PowerPC)
• Renesas RX610/RX621/RX62G/RX62N/RX62T/RX630/RX631/RX63N/RX63T

Features

• Stand-alone in-circuit-programmer
• Powered by 3 x AAA batteries or via USB connection
• Stores up to four configurations/data files
• Pushbutton selects between stored images/configurations
• 128MB memory for configuration and data file storage
• Supports internal and external Flash devices
• Data files can be updated via mass storage or via J-Flash
• Host interface: USB 2.0
• Target interfaces: 20-pin JTAG/SWD/FINE/SPD
• Programming speed typically between 30KB/sec and 1MB/sec
• Max programming speed depends on target hardware and max programming speed of the Flash memory
• Authorized Flashing limits number of programming cycles and protects against non-authorized access
• Dimensions: 130 x 65 x 25mm
• Free software updates, 2 years of support

Supplied with

20-pin 0.1in target ribbon cable, USB cable, 3 x AAA batteries

You may be interested in

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

SEGGER 5.16.01 Flasher Portable In Circuit Programmer for use with Flash microcontrollers
Imported by:

RS Components & Controls (I) Ltd

Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301

P.O.A.

SEGGER 5.16.01 Flasher Portable In Circuit Programmer for use with Flash microcontrollers
Stock information temporarily unavailable.
You may be interested in

Technical Document

Specifications

Brand

SEGGER

Accessory Type

In Circuit Programmer

For Use With

Flash microcontrollers

Product details

Flasher Portable Programmer

Flasher Portable has been designed to fill the need for a portable, battery-operated production-grade Flash memory programmer used for in-field firmware updates. Initial setup/preparation for stand-alone mode operation is done via the J-Flash software. It supports storage of multiple configurations/image files, so one unit can be used for different targets.

Supported Processors

• ARM 7/9/11
• ARM Cortex-A5/A7/A8/A9/A12/A15/A17
• ARM Cortex-M0/M0+/M1/M3/M4/M7
• ARM Cortex-R4/R5
• Freescale e200z0 (PowerPC)
• Renesas RX610/RX621/RX62G/RX62N/RX62T/RX630/RX631/RX63N/RX63T

Features

• Stand-alone in-circuit-programmer
• Powered by 3 x AAA batteries or via USB connection
• Stores up to four configurations/data files
• Pushbutton selects between stored images/configurations
• 128MB memory for configuration and data file storage
• Supports internal and external Flash devices
• Data files can be updated via mass storage or via J-Flash
• Host interface: USB 2.0
• Target interfaces: 20-pin JTAG/SWD/FINE/SPD
• Programming speed typically between 30KB/sec and 1MB/sec
• Max programming speed depends on target hardware and max programming speed of the Flash memory
• Authorized Flashing limits number of programming cycles and protects against non-authorized access
• Dimensions: 130 x 65 x 25mm
• Free software updates, 2 years of support

Supplied with

20-pin 0.1in target ribbon cable, USB cable, 3 x AAA batteries

You may be interested in