Polyamide high temp electric glue gun

RS Stock No.: 514-6202Brand: Power AdhesivesManufacturers Part No.: TEC650HT
View all in Glue Guns

Technical Document

Specifications

Brand

Power Adhesives

Product details

Polyamide Hot Melt Glue Gun

A high temperature Hot Melt glue gun that has been developed especially to use with our range of 12mm diameter Polyamide Hot Melt adhesive sticks.Typical uses include: potting and encapsulating, reinforcing cables on PCBs, TV yoke assembly and many more applications where high and low temperature resistances are required.

High temperature operation of up to 215°C
Fast warm-up time of 4-5 minutes
Silicone rubber nozzle shroud for extra safety
High output of up to 1.6 Kg/Hr of molten hot melt
Easy to use and control full hand lever trigger
Power-on warning light
Use with any polyamide glue sticks type 5 and 6 as shown on the ’Glue for Glue Guns’ charts

Supplied with

MSDS

Warning

Hot melt adhesive may reach temperatures in excess of 210°C

You may be interested in

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

Polyamide high temp electric glue gun

1

Available in multiples of 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.
Imported by:

RS Components & Controls (I) Ltd

Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301

P.O.A.

Polyamide high temp electric glue gun
Stock information temporarily unavailable.

1

Available in multiples of 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.
You may be interested in

Technical Document

Specifications

Brand

Power Adhesives

Product details

Polyamide Hot Melt Glue Gun

A high temperature Hot Melt glue gun that has been developed especially to use with our range of 12mm diameter Polyamide Hot Melt adhesive sticks.Typical uses include: potting and encapsulating, reinforcing cables on PCBs, TV yoke assembly and many more applications where high and low temperature resistances are required.

High temperature operation of up to 215°C
Fast warm-up time of 4-5 minutes
Silicone rubber nozzle shroud for extra safety
High output of up to 1.6 Kg/Hr of molten hot melt
Easy to use and control full hand lever trigger
Power-on warning light
Use with any polyamide glue sticks type 5 and 6 as shown on the ’Glue for Glue Guns’ charts

Supplied with

MSDS

Warning

Hot melt adhesive may reach temperatures in excess of 210°C

You may be interested in