Technical Document
Specifications
Brand
PhihongInput Voltage
90 → 264V ac
Number of Output Ports
4
Efficiency
75%
Length
200mm
Width
224.9mm
Weight
1.4kg
Minimum Temperature
0°C
Maximum Temperature
+40°C
Mounting Style
Rack Mount
Supported Ethernet Standards
IEEE802.3at
Injector Type
Mid-Span
Number of Ethernet Ports
4
Protection Type
Over Current, Over Voltage, Short Circuit
Response Time
10ms
Standards Met
CE, cULus
Series
POE125U
Product Type
4 Port PoE
Input AC Connector Type
IEC 320 C14
Country of Origin
China
Product details
125W, 4-Port PoE Midspan Injector
4-port Power-over-Ethernet Midspan Injector injects power into ethernet cables to supply power and data to a PoE enabled devices
Fully compliant to IEEE802.3at standard
125W power supply providing full power of 33.6W to all four ports - No power management required
Supports full power mode of Cisco AP1250
Diagnostic LEDs
Over temperature, over voltage/current and short circuit protection
Output voltage protection
Gigabit compatible (10/100/1000 base-T)
Fully regulated output
RJ45 Data In and Data/Power Out sockets
Harmonic current compliance to EN 61000-3-2
EMI compliance to EN 55022 Class B and FCC Class B
UNH IOL tested
3-pin IEC320 C14 mains input socket
Approvals
cUL/UL
Standards
EN60950-1:2001
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
P.O.A.
1
Technical Document
Specifications
Brand
PhihongInput Voltage
90 → 264V ac
Number of Output Ports
4
Efficiency
75%
Length
200mm
Width
224.9mm
Weight
1.4kg
Minimum Temperature
0°C
Maximum Temperature
+40°C
Mounting Style
Rack Mount
Supported Ethernet Standards
IEEE802.3at
Injector Type
Mid-Span
Number of Ethernet Ports
4
Protection Type
Over Current, Over Voltage, Short Circuit
Response Time
10ms
Standards Met
CE, cULus
Series
POE125U
Product Type
4 Port PoE
Input AC Connector Type
IEC 320 C14
Country of Origin
China
Product details
125W, 4-Port PoE Midspan Injector
4-port Power-over-Ethernet Midspan Injector injects power into ethernet cables to supply power and data to a PoE enabled devices
Fully compliant to IEEE802.3at standard
125W power supply providing full power of 33.6W to all four ports - No power management required
Supports full power mode of Cisco AP1250
Diagnostic LEDs
Over temperature, over voltage/current and short circuit protection
Output voltage protection
Gigabit compatible (10/100/1000 base-T)
Fully regulated output
RJ45 Data In and Data/Power Out sockets
Harmonic current compliance to EN 61000-3-2
EMI compliance to EN 55022 Class B and FCC Class B
UNH IOL tested
3-pin IEC320 C14 mains input socket
Approvals
cUL/UL
Standards
EN60950-1:2001