Technical Document
Specifications
Brand
BoplaType
DIN Rail Holder
Length
122mm
For Use With
TS 35 (Top Hat DIN Rail)
Width
88mm
Material
Polyamide
Dimensions
122 x 88 x 18mm
Height
18mm
Colour
Black
Country of Origin
Germany
Product details
Bopla Universal DIN Rail Holder TSH 35
The TSH 35 Din rail holder, for use with all Bopla enclosures that support DIN rails. This DIN rail holder consists of a base and a bolt, the bolt can be snapped into the base in various positions. It is fitted approximately in the middle of the enclosure, and the bolt projecting from the enclosure base can be disconnected from the rail by means of a screwdriver.
How to assemble
For assembly, insert the screws from the inside of the enclosure this guarantees full insulation protection. On small enclosures, the part of the bolt which projects upwards can be pinched off. In the case of very wide enclosures, it may be necessary to fit two DIN rail holders.
Features and Benefits
Material: Polyamide
Holder consists of two pieces - the foot and the latch
Colour: Black
Ideal for use with enclosure heights between 70 mm and 160 mm
Whats in the box?
1 DIN rail holder, screws for enclosure mounting
Typical Applications
Bopla Universal DIN rail holder TSH 35 are typical used in general purpose enclosures that support Top Hat DIN Rail applications
Stock information temporarily unavailable.
Please check again later.
₹ 456.45
Each (Exc. GST)
₹ 538.61
Each (Including GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 456.45
Each (Exc. GST)
₹ 538.61
Each (Including GST)
1
Buy in bulk
quantity | Unit price |
---|---|
1 - 9 | ₹ 456.45 |
10 - 14 | ₹ 447.31 |
15+ | ₹ 438.36 |
Technical Document
Specifications
Brand
BoplaType
DIN Rail Holder
Length
122mm
For Use With
TS 35 (Top Hat DIN Rail)
Width
88mm
Material
Polyamide
Dimensions
122 x 88 x 18mm
Height
18mm
Colour
Black
Country of Origin
Germany
Product details
Bopla Universal DIN Rail Holder TSH 35
The TSH 35 Din rail holder, for use with all Bopla enclosures that support DIN rails. This DIN rail holder consists of a base and a bolt, the bolt can be snapped into the base in various positions. It is fitted approximately in the middle of the enclosure, and the bolt projecting from the enclosure base can be disconnected from the rail by means of a screwdriver.
How to assemble
For assembly, insert the screws from the inside of the enclosure this guarantees full insulation protection. On small enclosures, the part of the bolt which projects upwards can be pinched off. In the case of very wide enclosures, it may be necessary to fit two DIN rail holders.
Features and Benefits
Material: Polyamide
Holder consists of two pieces - the foot and the latch
Colour: Black
Ideal for use with enclosure heights between 70 mm and 160 mm
Whats in the box?
1 DIN rail holder, screws for enclosure mounting
Typical Applications
Bopla Universal DIN rail holder TSH 35 are typical used in general purpose enclosures that support Top Hat DIN Rail applications