Steca 12 V, 24 V 20A Solar Charge Controller
Technical Document
Specifications
Brand
StecaSolar Panel Voltage
12 V, 24 V
Maximum Power Rating for 12 V Panels
240W
Maximum Current Rating for 12 V Panels
20A
Maximum Power Rating for 24 V Panels
480W
Maximum Current Rating for 24 V Panels
20A
Dimensions
187 x 96 x 44mm
Depth
44mm
Length
187mm
Width
96mm
Product details
Solar Charge Controllers
Solar charge controllers or regulators are recommend to avoid battery damage from overcharging or deep discharge. The Steca regulator range is designed for simplicity of installation and can be used with gel, AGM (absorbed glass matt), sealed and non-sealed lead acid batteries. They should be protected from the weather and located within 1.5m run of cable from the battery bank.
Regulator Specifications
Solsum and PR Range Product Features
Diode protection to prevent reverse current from the solar panel in darkness
Efficient PWM regulation (pulse width modulation)
LED System Indicators
Low voltage disconnect
Temperature compensation for accurate voltage sensing
Reverse polarity protection
Automatic system voltage detection for 12V or 24V systems
PR Range incorporate a microprocessor giving the following additional features
Digital display of battery volts or state of charge
Digital display of charge and load currents
Digital display of accumulated ampere hours charged and drawn
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
P.O.A.
1
Technical Document
Specifications
Brand
StecaSolar Panel Voltage
12 V, 24 V
Maximum Power Rating for 12 V Panels
240W
Maximum Current Rating for 12 V Panels
20A
Maximum Power Rating for 24 V Panels
480W
Maximum Current Rating for 24 V Panels
20A
Dimensions
187 x 96 x 44mm
Depth
44mm
Length
187mm
Width
96mm
Product details
Solar Charge Controllers
Solar charge controllers or regulators are recommend to avoid battery damage from overcharging or deep discharge. The Steca regulator range is designed for simplicity of installation and can be used with gel, AGM (absorbed glass matt), sealed and non-sealed lead acid batteries. They should be protected from the weather and located within 1.5m run of cable from the battery bank.
Regulator Specifications
Solsum and PR Range Product Features
Diode protection to prevent reverse current from the solar panel in darkness
Efficient PWM regulation (pulse width modulation)
LED System Indicators
Low voltage disconnect
Temperature compensation for accurate voltage sensing
Reverse polarity protection
Automatic system voltage detection for 12V or 24V systems
PR Range incorporate a microprocessor giving the following additional features
Digital display of battery volts or state of charge
Digital display of charge and load currents
Digital display of accumulated ampere hours charged and drawn