Technical Document
Specifications
Polarised
Polar
Dimensions (L x W x H)
94 x 94 x45mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
Lead Pitch
2mm
Diameter
5mm
USB Version
USB2.0
Lifetime
1000h
Capacitance
1µF
Tolerance
±20%
Dissipation Factor
10%
Voltage
100V dc
Length
11mm
Height
11mm
Series
RS
Dimensions
5 (Dia.) x 11mm
Ripple Current
15mA
Brand
RS ProCountry of Origin
Taiwan, Province Of China
Product details
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Works solely with the EL-WiFi range of sensors
Detects alarm triggers from all EL-WiFi sensors
Audible alarm with built-in speaker (SPL 100dBA @ 1m)
Flashing red LEDs light up through translucent red rear moulding
Functions at all times, including when PC turned off
Easy set-up using free PC software application
Configurable alert tones and volume
Auto mute
Signal strength indicator
Protection rating IP55
Firmware upgradeable via USB
Supported Security Protocols WEP, WPA/WPA2-PSK
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11
Stock information temporarily unavailable.
Please check again later.
₹ 10.95
Each (In a Pack of 100) (Exc. GST)
₹ 12.921
Each (In a Pack of 100) (Including GST)
Standard
100
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 10.95
Each (In a Pack of 100) (Exc. GST)
₹ 12.921
Each (In a Pack of 100) (Including GST)
Standard
100
Buy in bulk
quantity | Unit price | Per Pack |
---|---|---|
100 - 400 | ₹ 10.95 | ₹ 1,095.00 |
500 - 900 | ₹ 10.14 | ₹ 1,014.00 |
1000 - 2400 | ₹ 9.32 | ₹ 932.00 |
2500 - 4900 | ₹ 8.92 | ₹ 892.00 |
5000+ | ₹ 8.11 | ₹ 811.00 |
Technical Document
Specifications
Polarised
Polar
Dimensions (L x W x H)
94 x 94 x45mm
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+105°C
Leakage Current
<=0.01 CV or 3 μA @ 1 min
Lead Pitch
2mm
Diameter
5mm
USB Version
USB2.0
Lifetime
1000h
Capacitance
1µF
Tolerance
±20%
Dissipation Factor
10%
Voltage
100V dc
Length
11mm
Height
11mm
Series
RS
Dimensions
5 (Dia.) x 11mm
Ripple Current
15mA
Brand
RS ProCountry of Origin
Taiwan, Province Of China
Product details
Corintech FilesThruTheAir WiFi-Alert Monitoring System
The WiFi-Alert is a standalone monitoring system for all data loggers in the FilesThruTheAir™ WiFi range. The WiFi-Alert will receive alarm messages from any FilesThruTheAir™ WiFi sensor connected to the same wireless network. The WiFi-Alert indicates an alarm activation using high brightness LEDs and a choice of 9 alarm tones. The WiFi-Alert will also continue to work when the PC is turned off.
The WiFi-Alert has been designed to be continuously powered via the mains however it does contain a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.
The audible alarm can be muted by pressing the WiFi-Alert button once or remotely from the PC software. There is also a configurable auto-mute function.
After initial set-up audible and visual alerts can be reconfigured wirelessly from the PC software. The audible and visual WiFi signal strength indicator is activated by pressing the WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.
The WiFi-Alert has an IP44 rating and can be attached to a wall or flat surface using the bracket or adhesive pad provided. It is also supplied with a micro USB lead and mains charger.
Works solely with the EL-WiFi range of sensors
Detects alarm triggers from all EL-WiFi sensors
Audible alarm with built-in speaker (SPL 100dBA @ 1m)
Flashing red LEDs light up through translucent red rear moulding
Functions at all times, including when PC turned off
Easy set-up using free PC software application
Configurable alert tones and volume
Auto mute
Signal strength indicator
Protection rating IP55
Firmware upgradeable via USB
Supported Security Protocols WEP, WPA/WPA2-PSK
Supplied with
Micro USB lead, wall bracket, sticky pad, rechargeable Lithium Polymer battery, mains charger
Standards
IEEE 802.11