Parker Hydraulic Gear Pump, 8cm³
Technical Document
Specifications
Brand
ParkerDisplacement
8cm³
Maximum Operating Pressure
250 bar
Minimum Rotational Speed
500rpm
Manufacturer Series
PGP511
Direction of Rotation
Clockwise
Maximum Rotational Speed
2500rpm
Body Dimensions
130.7 x 89.5 x 114mm
Body Height
114mm
Body Length
130.7mm
Body Width
89.5mm
Country of Origin
Czech Republic
Product details
Fixed Displacement Gear Pump, 1:8 Tapered Shaft
Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international bushing block style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide.
Up to 275 bar (4000 psi) continuous operation
High efficiency
Low noise
Wide variety of integral valve options
Single and bi-rotational motors
Gear Pumps
Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
Stock information temporarily unavailable.
Please check again later.
₹ 36,875.20
Each (Exc. GST)
₹ 43,512.74
Each (inc. GST)
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 36,875.20
Each (Exc. GST)
₹ 43,512.74
Each (inc. GST)
1
Technical Document
Specifications
Brand
ParkerDisplacement
8cm³
Maximum Operating Pressure
250 bar
Minimum Rotational Speed
500rpm
Manufacturer Series
PGP511
Direction of Rotation
Clockwise
Maximum Rotational Speed
2500rpm
Body Dimensions
130.7 x 89.5 x 114mm
Body Height
114mm
Body Length
130.7mm
Body Width
89.5mm
Country of Origin
Czech Republic
Product details
Fixed Displacement Gear Pump, 1:8 Tapered Shaft
Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international bushing block style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide.
Up to 275 bar (4000 psi) continuous operation
High efficiency
Low noise
Wide variety of integral valve options
Single and bi-rotational motors
Gear Pumps
Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.