Panasonic Pressure Sensor, -101.3kPa Min, 0kPa Max, Relay Output, Gauge, Vacuum Reading
Technical Document
Specifications
Brand
PanasonicPressure Reading Type
Gauge, Vacuum
Minimum Pressure Reading
-101.3kPa
Maximum Pressure Reading
0kPa
Accuracy
±1 %
Output Type
Relay
Media Measured
Non-Corrosive Gas
Process Connection
G1/8
Analogue Output
5 V dc, 100 mA
Electrical Connection
Wire Lead
Response Time
2.5 ms
Supply Voltage
12 → 24 V dc
Housing Material
ABS, PPS
IP Rating
IP40, IP67
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+50°C
Country of Origin
Japan
Product details
Pressure Transducer, DP2
The DP2 series is the new generation of pressure gauges in the field of pressure measurement technology.
Microprocessor-controlled devices
Measuring in overpressure and vacuum range
All functions can be programmed conveniently using front buttons
LED display for displaying functions and measured values
Analogue output with 0.1% resolution
Units freely selectable
Zero alignment
Two adjustable limit values with switching output and LED indicator
Flat design for wall mounting
Standard design for direct and front panel mounting
Accessories
MS-DPX mounting clips for floor attachment
MS-DPX-2 front installation assembly kit (not for flat design, only standard design)
DPX-04 dust protection cover for MS-DPX-2
Pressure Sensors With Electronic Display
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
P.O.A.
1
Technical Document
Specifications
Brand
PanasonicPressure Reading Type
Gauge, Vacuum
Minimum Pressure Reading
-101.3kPa
Maximum Pressure Reading
0kPa
Accuracy
±1 %
Output Type
Relay
Media Measured
Non-Corrosive Gas
Process Connection
G1/8
Analogue Output
5 V dc, 100 mA
Electrical Connection
Wire Lead
Response Time
2.5 ms
Supply Voltage
12 → 24 V dc
Housing Material
ABS, PPS
IP Rating
IP40, IP67
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+50°C
Country of Origin
Japan
Product details
Pressure Transducer, DP2
The DP2 series is the new generation of pressure gauges in the field of pressure measurement technology.
Microprocessor-controlled devices
Measuring in overpressure and vacuum range
All functions can be programmed conveniently using front buttons
LED display for displaying functions and measured values
Analogue output with 0.1% resolution
Units freely selectable
Zero alignment
Two adjustable limit values with switching output and LED indicator
Flat design for wall mounting
Standard design for direct and front panel mounting
Accessories
MS-DPX mounting clips for floor attachment
MS-DPX-2 front installation assembly kit (not for flat design, only standard design)
DPX-04 dust protection cover for MS-DPX-2
Pressure Sensors With Electronic Display