Howard Leight Black
Technical Document
Specifications
Product details
Propeller Elev-8 robotic quadcopter kit
The ELEV-8 quadcopter is a flying robotic platform propelled by four fixed rotors. Unlike standard helicopters, a quadcopter uses fixed-pitch blades, whose rotor pitch does not vary as the blades rotate: control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.
ELEV-8 uses a HoverFly electronic control board with a Propeller multicore microprocessor to provide stable flight. This system yields a stable platform with no mechanical linkages for a small maneuverable and agile aircraft.
The kit includes all necessary parts apart from R/C radio equipment & a battery. A six channel R/C system is recommended.
The ELEV-8 platform is large enough for outdoor flight and has plenty of room for payload and attachments.
ELEV-8 Quadcopter Version 2
Open under body for camera mounting
Easily customised
Protected electronics
Modular frame for fast repair
Protective motor mounts
Can fly with added payloads up to 1 lb (450 g) in weight
Weight: 2.5 lbs (1130 g) fully assembled (without battery)
Size: 654 mm, motor axis diameter
2 x 1045C clockwise composite propellers
2 x 1045CR anti clockwise composite propellers
4 x 30A Electronic Speed Controllers
4 x Keda KA20-20L BLDC outrunner 1050 kV motors
HoverflyOPEN Flight Controller with Invensense ITG-3200 gyroscopic sensor, powered by a Parallax Propeller 1 microcontroller
Open Source: design files available online
Supplied with
Hardware pack, wiring harness, safety glasses
Warning
Due to the size of this platform, it can cause serious damage or injury. There is no protection around any of the propellers. We recommend using the RCAPA guidelines for safe use of this aircraft (http://www.rcapa.net/guidelines.aspx).
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
P.O.A.
1
Technical Document
Specifications
Product details
Propeller Elev-8 robotic quadcopter kit
The ELEV-8 quadcopter is a flying robotic platform propelled by four fixed rotors. Unlike standard helicopters, a quadcopter uses fixed-pitch blades, whose rotor pitch does not vary as the blades rotate: control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.
ELEV-8 uses a HoverFly electronic control board with a Propeller multicore microprocessor to provide stable flight. This system yields a stable platform with no mechanical linkages for a small maneuverable and agile aircraft.
The kit includes all necessary parts apart from R/C radio equipment & a battery. A six channel R/C system is recommended.
The ELEV-8 platform is large enough for outdoor flight and has plenty of room for payload and attachments.
ELEV-8 Quadcopter Version 2
Open under body for camera mounting
Easily customised
Protected electronics
Modular frame for fast repair
Protective motor mounts
Can fly with added payloads up to 1 lb (450 g) in weight
Weight: 2.5 lbs (1130 g) fully assembled (without battery)
Size: 654 mm, motor axis diameter
2 x 1045C clockwise composite propellers
2 x 1045CR anti clockwise composite propellers
4 x 30A Electronic Speed Controllers
4 x Keda KA20-20L BLDC outrunner 1050 kV motors
HoverflyOPEN Flight Controller with Invensense ITG-3200 gyroscopic sensor, powered by a Parallax Propeller 1 microcontroller
Open Source: design files available online
Supplied with
Hardware pack, wiring harness, safety glasses
Warning
Due to the size of this platform, it can cause serious damage or injury. There is no protection around any of the propellers. We recommend using the RCAPA guidelines for safe use of this aircraft (http://www.rcapa.net/guidelines.aspx).