Chauvin Arnoux P01120409 Current Clamp
Technical Document
Specifications
Brand
Chauvin ArnouxCurrent
200A
Probe Type
AC
Minimum Bandwidth
40Hz
Maximum Bandwidth
10kHz
Maximum Conductor Size
20mm
Safety Category
CAT I V 300 V, CAT III 600 V
Safety Category Level
CAT I, CAT III
Model Number p
MN60
Model Number (p)
MN60
Best Accuracy
±1.5% + 5 mV
Safety Category Voltage
300 V, 600 V
Bandwidth
40 Hz → 40 kHz
Country of Origin
France
Product details
Chauvin Arnoux MN60 Mini Clamps
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.
Safe, non intrusive current measurement
40Hz to 10kHz bandwidth
Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable
Max. conductor size 20mm dia. or 20 x 5mm bus bar
Fitted with a 2m coaxial lead and 50Ω BNC plug to suit most analogue & digital oscilloscopes
Conforms to IEC1010-2-032 (safety standard) 600V Cat III
Stock information temporarily unavailable.
Please check again later.
₹ 36,260.83
Each (Exc. GST)
₹ 42,787.78
Each (inc. GST)
Calibration type
No Calibration
1
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 36,260.83
Each (Exc. GST)
₹ 42,787.78
Each (inc. GST)
Calibration type
No Calibration
1
Technical Document
Specifications
Brand
Chauvin ArnouxCurrent
200A
Probe Type
AC
Minimum Bandwidth
40Hz
Maximum Bandwidth
10kHz
Maximum Conductor Size
20mm
Safety Category
CAT I V 300 V, CAT III 600 V
Safety Category Level
CAT I, CAT III
Model Number p
MN60
Model Number (p)
MN60
Best Accuracy
±1.5% + 5 mV
Safety Category Voltage
300 V, 600 V
Bandwidth
40 Hz → 40 kHz
Country of Origin
France
Product details
Chauvin Arnoux MN60 Mini Clamps
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.
Safe, non intrusive current measurement
40Hz to 10kHz bandwidth
Ergonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cable
Max. conductor size 20mm dia. or 20 x 5mm bus bar
Fitted with a 2m coaxial lead and 50Ω BNC plug to suit most analogue & digital oscilloscopes
Conforms to IEC1010-2-032 (safety standard) 600V Cat III