Technical Document
Specifications
Brand
Allegro MicrosystemsSensor Type
Hall Effect Sensors
Mounting Type
Through Hole
Magnetic Type
Bipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Height
3.02mm
Dimensions
4.09 x 1.52 x 3.02mm
Minimum Operating Temperature
-40 °C
Pin Count
3
Maximum Operating Temperature
+150 °C
Package Type
SIP
Typical Magnetic Sensor Hysteresis
45 Gs
Product details
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
AEC-Q100 automotive qualified
Symmetrical latch switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply down to 3 V
Reverse battery protection
Hall Effect Sensors, Allegro MicroSystems
Stock information temporarily unavailable.
Please check again later.
₹ 83.42
Each (Supplied in a Bag) (Exc. GST)
₹ 98.436
Each (Supplied in a Bag) (Including GST)
5
RS Components & Controls (I) Ltd
Distribution hub - B-89, Sector 67, Noida, Gautam Budh Nagar, (Uttar Pradesh), 201 301
₹ 83.42
Each (Supplied in a Bag) (Exc. GST)
₹ 98.436
Each (Supplied in a Bag) (Including GST)
5
Buy in bulk
quantity | Unit price | Per Bag |
---|---|---|
25 - 75 | ₹ 83.42 | ₹ 2,085.50 |
100 - 225 | ₹ 81.28 | ₹ 2,032.00 |
250 - 475 | ₹ 80.25 | ₹ 2,006.25 |
500+ | ₹ 79.25 | ₹ 1,981.25 |
Technical Document
Specifications
Brand
Allegro MicrosystemsSensor Type
Hall Effect Sensors
Mounting Type
Through Hole
Magnetic Type
Bipolar
Maximum Operating Supply Voltage
24 V
Minimum Operating Supply Voltage
3 V
Height
3.02mm
Dimensions
4.09 x 1.52 x 3.02mm
Minimum Operating Temperature
-40 °C
Pin Count
3
Maximum Operating Temperature
+150 °C
Package Type
SIP
Typical Magnetic Sensor Hysteresis
45 Gs
Product details
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
AEC-Q100 automotive qualified
Symmetrical latch switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply down to 3 V
Reverse battery protection