W21 vitreous wirewound resistor,3R0 2.5W
Image representative of range only
RS Stock No.
Mfr Part No.
Still not found what you are looking for?
Not found what you are looking for? You can find products which may be more suitable
by simply checking the features that interest you above and clicking the Find button.
W21 Series 2.5W, Axial
|Power at 70°C||2.5W|
|Power at 25°C||3W|
|Temperature Coefficient||±75 ppm/°C|
|Operating Temperature||-55°C → +350°C|
|Limiting Element Voltage||100V|
|Body Length||12.7 mm|
|Body Diameter||5.6 mm|
|Lead Length||22.75 mm|
|Lead Diameter||0.8 mm|
Vitreous Enamel, Axial - 2.5W to 14W
A range of high power resistors in small body sizes suitable for use in harsh environments. Their high stability and reliability make them particularly suitable for use in protection circuits.,The resistance wire element is wound onto a high purity ceramic substrate and employs an all welded cap and lead method of construction giving considerable strength and resistance to damage. The vitreous enamel protective coating is resistant to all normal PCB cleaning solvents.,Application note. Terminations should not be bent closer than 1.5mm from the body. Recommended minimum bend radius is 1mm. For full rated power dissipation terminations should not be soldered closer than 4mm from the body.,When cold, vitreous enamel has excellent insulation resistance; however the specific resistance decreases with increasing temperature. Therefore if the resistor is operating at or near maximum temperature it cannot be classed as insulating and should not be in contact with any conducting materials.